Yorco BOD Incubator YSI-440

Most versatile and highly reliable low temperature incubator, to make Biochemical Oxygen Demand determinations and for preservation of vaccines, insulin, lever extracts, chemicals etc.

Construction :- Robust Construction. Outer cabinet is made of M.S. Sheet, duly pre treated & finished with epoxy powder coated paint for lasting finish. Inner chamber is made of highly polished stainless steel. It has provision for allowing wide range of shelf positions & spacings. Stainless steel trays are also provided. Chamber is duly insulated to minimize heat loss. Two doors are provided. Outer door is insulated and is fitted with magnetic gasket for air tight closing for no temperature loss. Door is provided with lock and key. Inner door is made of unbreakable transparent acrylic glass empaneled in aluminum door frame for inspecting the specimens inside chamber, without opening the door and with minimum temperature loss.

Control Panel :- All controls and circuitry are housed at the top of the incubator and therefore protected from spillage. Separate indicator lamps for mains, heating and cooling are fitted. Temperature setting fine and coarse knobs allow the user to set any desired temp. A Digital Voltmeter is provided on the panel to read the incoming voltage.


Product Features

Features :-

Temperature Control :- The heart of the YORCO B.O.D. Incubator is the excellent and reliable solid state temperature controller cum indicator digital display, range from 5°C to 50°C ± 0.5°C. Hermetically sealed, high performance compressor works on Environment friendly and CFC free refrigerant and PUF insulated to lower the inside chamber temperature. Heating elements are placed in the path of moving air duly insulated from the body. Cooling coils also lie in the air circulation path. Air is circulated by a double shaft self-cooled, blower to keep the temp. uniform throughout the inner chamber. A safety thermostat is provided, which switches off the heaters in the event of failure of the normal temp. control system to protect the specimens from excessive heat. Also fitted with a door operated lamp for illumination inside the chamber. Conceded aesthetic design caster wheels are provided at bottom for easy mobility.


BOD Incubator YSI-440 with Salient Features

Salient Feature :- YORCO BOD INCUBATOR switches from heating to cooling and vice versa irrespective of the ambient temperature because of its unique design and thus is capable of working without any user intervention. Supplied complete with 3 shelves of Stainless Steel as per the chamber, cord and plug, to work on 220 Volts, 1 Phase, 50 Hz, AC supply. The unit is supplied with suitable Automatic Voltage Stabilizer.


Available in following chamber sizes :-

W x H x D
Cap.Cu. Ft.

S.S.(304 grade)

Micoprocessor controlled

455 x 610 x 415mm
505 x 830 x 415mm
575 x 875 x 550mm
650 x 900 x 580mm
700 x 900 x 640mm

Optional Accessories :-

  • YSI-440 A INTERIOR ILLUMINATION With 3 Nos. fluorescent tubes of 60 cms
  • YSI-440 B AUTOMATIC TIMER, range 0–24 hrs regulating illumination cycle
  • YSI-440 C Arrangement for incubation carbon dioxide & air mixtur Carbon–di–oxide Cylinder 9 ltrs. Air compressor