Due to progressive policy of continuously developing high quality products, “YORCO” was the first in India to get the prestigious ISI mark for their Hot Air Sterilizers. All the instruments are subjected to tough quality control before despatch. These are designed principally to destroy Bacteria, Viruses, Fungus and Sterilize Surgical & Dental Instruments. Glass wares etc. by application of dry heat at temp. ranging between 140°C to 200°C as per IS 3119.
Construction :-YORCO Ovens are sturdy, with double walled construction. Inner chamber is made of Highly Polished Stainless Steel AISI 304 grade. Outer chamber is made of Mild Steel Sheet duly pre-treated in seven tanks process for surface treatment & are finished with durable Powder Coated Paint. (S.S. Outer chamber is optional) 75 mm gap between the walls is filled with special grade glass wool for proper insulation and to avoid heat losses. Inner chamber is fabricated with ribs to adjust shelves to any convenient height. Supplied with 2 or 3 removable shelves. Shelves are made of polished SS Sheet. Insulated door is fitted with heavy hinges with a special design spring - loaded door closing device. Door gasket is made of synthetic rubber compound
Heating Element :- Heating elements are made of high grade imported Nichrome wire, properly insulated and are generally placed at the bottom and both side ribs for uniform temperature all over the space.
Temperature Control :- Temperature is controlled by Imported capillary type Thermostat. Temperature control knob of each oven is graduated in centigrade degrees after actually observing the temperature is steady state. Supplied with L-shaped prismatic glass THERMOMETER fitted on top of the Oven for reading the chamber temperature. Wide temperature 50°C to 250°C ±1oC ovens for various applications.
Ventilation :- Air ventilator ports provided on both sides at top to ventilate, gases and fumes if any.
Control Panel :- The equipment is provided with a panel having a thermostat control knob. ON/OFF switch, two pilot indication lights and provision for fixing the TIMER.
Power Requirement :- Supplied with cord and plug. Suitable to operate on 220 V single phase, 50 Hz, AC supply.
S.S. (304 grade)
Spare Parts :-